高寒地区牧草工厂化生产设备的设计与试验
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

甘肃省2014年秸秆饲料化利用项目(2130106)


Design and experiment of forage grass factory producing installation in alpine region
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决高寒地区饲草料短缺和无法种植常规饲草的矛盾,该文设计试制了一套简易植物工厂。在10 m2的彩钢房内设计安装了8组不锈钢牧草生产架,通过半自动化控制集装箱式牧草生产车间内植物生产所需的温度、湿度、光照、营养液循环等环境条件,实现了在高寒地区连续、快速、高效、节水环保地生产牧草的目的。生产试验结果表明,设施设备能够满足高寒地区牧草工厂化生产的需要,玉米生产的最佳播种量为450 g/盘,经过9 d生产周期后可收获1 891.5 g新鲜玉米饲草,按此产能每年收获36茬牧草计算,在此集装箱式车间内每年可生产优质新鲜牧草16.33 t。

    Abstract:

    Forage grass is an important material basis and security guarantee for the development of livestock industry.Forage grass with high quality not only provides adequate nutrition for livestock, but also has important impact on the quality of livestock products.Alpine areas are not suitable for planting corn, alfalfa, and other conventional forage grass because of the insufficient accumulated temperature and transient frost-free season.However, the forage grass requirement of herbivorous livestock is large, for example, one sheep requires 657 kg hay per year, and it is very inelastic.In this case, shortage of forage grass has become a key limiting factor of herbivorous animal husbandry development and grassland ecological construction due to the dual pressures of the natural grassland degradation and the grazing blocked by fencing in alpine region.Plant factory is a new agricultural model which can achieve the purpose of efficient crop production by high-precision environmental control in facility.Though research and practice of plant factory in China have achieved the gratifying results in recent years, applying this technology to the forage grass production is still blank.For the energy-saving production of fresh forage grass in poor environment such as the alpine region, a container-type plant factory was designed and tested.To maximize space usage of the production departments, a six-level hydroponic cultivation system(1.5 m×0.55 m×2.3 m)(length×width×height) was installed.Semi-automatic control of artificial lighting lamps, automatic water circulation, and automatic heating facilities were used to optimize temperature, humidity, light, nutrient solution, and other environmental factors on forage grass production.In a plant factory, the optimal control for obtaining higher yield and better quality of plants was essential.Optimal regulators with temperature sensing probe and humidity sensing probe were used to control the water status and growth temperature of forage grass, and the nutrient solution was supplied by bottom watering.Light emitting diode (LED) fluorescent lamp was controlled by an automatic timing switch.All installation and debugging of facilities and equipments had been completed in a farming cooperatives of Tianzhu County, Gansu Province.Four batches of forage grass production experiments were carried out in January 2015 in order to test the operation and production capacity of equipment.The ordinary merchandise maize(Jinkai 3) bought from Jin Lvyuan Farming Technology Company was used as the experimental material.Maize after harvest was dried to a moisture content that was below 13% and then threshed for later use.The thousand kernel weight of experimental maize after the screening of impurities and broken grains was 330 g while the germination rate was higher than 85%.Temperature of the forage grass factory under natural conditions was between -21 and -4 ℃.According to the dimension of seedling tray used in this experiment(54 cm×27 cm×6 cm), we set up 5 treatments with different seed quantity of 300, 350, 400, 450 and 500 g) and each had 5 replicates.The upper and lower limit of the forage grass factory temperature were set to 30 and 26 ℃, respectively, and those of relative humidity were set to 85% and 65%, respectively.Supplementary illumination time was from 7:00 to 18:00.The effects of different planting densities on height, growth, root-shoot ratio and other indicators of forage grass were detected under the same conditions.And then the optimum seeding rate and productivity of the system were determined.The first batch of test material was sowed on January 5, 2015.Nine days after planting, the hydroponic forage grass with the seed quantity of 450 g showed the best production performance.The average height and yield were reached 24.96 cm and 1 891.5 g respectively, while the cost reduced to 0.4 yuan producing 1 kg fresh grass.On this calculation, this container-type plant factory could produce 16.33 ton fresh forage grass.Test results show that this factory production installation can meet the needs of pasture plant production in alpine region.

    参考文献
    相似文献
    引证文献
引用本文

单华佳,汪裕龙,马金宝.高寒地区牧草工厂化生产设备的设计与试验[J].农业工程学报,2016,32(1):62-67. DOI:10.11975/j. issn.1002-6819.2016.01.008

Shan Huajia, Wang Yulong, Ma Jinbao. Design and experiment of forage grass factory producing installation in alpine region[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE),2016,32(1):62-67. DOI:10.11975/j. issn.1002-6819.2016.01.008

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-08-04
  • 最后修改日期:2015-11-22
  • 录用日期:
  • 在线发布日期: 2015-12-30
  • 出版日期:
文章二维码
您是第位访问者
ICP:京ICP备06025802号-3
农业工程学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司